|
|
|
|
GPSU + MU and Furuno GP 30/35 & GP 31/36 Instructions CAUTION: uploading to FURUNO will erase all waypoint/routes stored in the FURUNO. You must upload the complete file. You CANNOT update waypoints. To Upload from PC/GPSU to FURUNO (GPSU refers to the GPSU Program Window; FURUNO refers to the GPS Unit) In GPSU (after you select/open the file to upload) Options > Field Properties Set "Waypoint ID Length" to 6. In "SYMBOL SET" box select or type "SSFRNO" Click "OK" To setup GPSU for FURUNO GPS > Setup Mark FURUNO in Interface Mode Mark COM Port to the com port on PC that you are using. Select Baud Rate 4800 Click "OK" FURUNO > Press MENU until you get to Main Menu. a. Select I/0 SETUP > ENT b. Select LOAD WP/RTE from PC? > ENT c. Next screen CONTINUE? > ENT d. Next screen ARE YOU SURE > ENT GPSU >GPS > Upload All/Upload Highlighted ALL You will see a pop-up box "Confirm Upload (except hidden)" Click "OK" At this time you should see waypoints counting up in the GPSU status bar in bottom left. At the end of the transfer the FURUNO screen will say LOADING COMPLETE HIT ANY KEY. (Hit any key and the FURUNO will return to MAIN MENU) To Download from the FURUNO to PC/GPSU (GPSU refers to the GPSU Program Window; FURUNO refers to the GPS Unit) In GPSU Options > Field Properties Set "Waypoint ID Length" to 6. In "SYMBOL SET" box select or type "SSFRNO" Click "OK" To setup GPSU for FURUNO GPS > Setup Mark FURUNO in Interface Mode Mark COM Port to the com port on PC that you are using. Select Baud Rate 4800 Click "OK" GPSU> GPS > Download You will now see a pop-up box "When Waypoint download finished, do GPS|Disconnect. Click "OK" FURUNO > Press MENU until you get to Main Menu. a) Select I/0 SETUP > ENT b) Select SAVE WP/RTE to PC? > ENT c) Next screen CONTINUE? > ENT d) Next screen ARE YOU SURE > ENT At this time you should see waypoints counting up in the GPSU status bar in bottom left. At the end of the transfer the FURUNO screen will say SAVING COMPLETE HIT ANY KEY. (hit any key and the FURUNO will return to MAIN MENU.) GPSU select GPS > Disconnect. At this time the GPSU Waypoint screen should show the waypoints. You can now manage the data with GPSU |
