|
|
|
|
GPSU + MU and Raytheon L760 Instructions To setup GPSU for RAYTHEON L760 GPS > Setup Mark RAYTHEON in Interface Mode Mark COM Port to the com port on PC that you are using. Select Baud Rate 4800 To Download from the RAYTHEON to PC/GPSU GPSU> GPS > Download RAYTHEON > Press MARKS a) Press the soft key WAYPOINT LIST. b) Press the soft key SEND WPT LIST ON NMEA. c) The soft key changes to STOP SENDING WAYPOINTS. d) The waypoint and route lists are transmitted from the chartplotter to the PC/GPSU At this time you should see waypoints counting up in the GPSU status bar in bottom left. 3) GPSU select GPS > Disconnect. At this time the GPSU Waypoint screen should populate with the waypoints. You can now manage the data with GPSU
To Upload from PC/GPSU to RAYTHEON CAUTION: uploading to RAYTHEON will erase all waypoint/routes stored in the RAYTHEON. You must upload the complete file. You CANNOT update waypoints.
1) RAYTHEON > To display the waypoint list, press 1. Press the soft key WAYPOINT LIST.2. Press the WAYPOINT TRANSFER soft key.3. Press the soft key RECEIVE WPTS FROM ST/NMEA. The soft key changes to STOP RECEIVING WAYPOINTS.4. To disable waypoint transfer, press the soft key STOP RECEIVING WAY-POINTS.5. Alternatively, press ENTER, or CLEAR, twice to close the Waypoint List.
2) GPSU >GPS > Upload All/Upload Highlighted all At this time you should see waypoints counting up in the GPSU status bar in bottom left. GPSU > GPS > Disconnect. |
